Sick 1061025

Sick EcoLine Wire Draw Encoder; Measurement Range: 0 to 3m; Connection Type: Connector M23, 12-Pin, Male, Radial; Supply Voltage: 4.5 to 32 V; Power Consumption: 0.7 W; Clock Frequency: 1 MHz, 2 MHz; Maximum Output Frequency: 20 g, 10 Hz to 2000 Hz (According to EN 60068-2-6) Frequency Range of Resistance to Vibrations; Pulses Per Revolution: 4096; Permissible Relative Humidity: 90 % (Condensation of the Optical Scanning not Permitted); Maximum Operating Speed: 4 m/s; Measuring Wire Diameter: 0.55 mm; Initialization Time: ≤ 2 ms; Spring Return Force: 5 to 6.3 N; Actual Wire Draw Length: 3.2m; Wire Acceleration: 10 m/s²; Material: Plastic Housing, Noryl Wire Draw Mechanism; Operating Temperature: 0 to 70°C (AFM60E), -20 to 70°C (AFM60B Encoder), -30 to 70°C (Mechanics); Weight: 510 g (Including Encoder), 1.2 g/m (Measuring Wire), 250 g (Mechanics)

• 
  Brochure 1
• 
  Brochure 2
• 
  Brochure 3
• 
  Catalog
• 
  Installation Instructions 1
• 
  Installation Instructions 2
• 
  Specification Sheet
• 
  Technical Drawing 1

The slim design of the EcoLine family is ideal for applications with limited space. Its modularity makes it suitable for a large selection of measuring lengths, interfaces and encoders. Due to the into the drum integrated spring as well as the adaption without coupling, it is possible to achieve high precision and stability. The special nozzle serves to protect the measuring wire from damage caused by vibration. The intuitive teach-in function provided in analog options also enables easy system integration.

• Modular measuring system with a wide selection of interfaces/measuring lengths
• Very small, slim housing (55 to 190 mm) with spring integrated in the measurement drum
• Light yet shock-proof and temperature-resistant plastic housing
• Analog interface with teach-in function at the encoder
• Slimline mechanics offers space- and cost-saving design
• Numerous possible combinations of interfaces and measuring lengths
• Advanced programming options lead to a reduction in the amount of variants, save costs and reduce storage
• Analog interface speeds up commissioning and cost-effective interface card can be used
• 250 years (This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532) (The value applies to the mounted encoder)
• Electronic adjustment via SET cable
• Highly flexible stranded steel 1.4401 stainless steel V4A measuring wire
• Compliance to EN 61000-6-2 and EN 61000-6-3 EMC
• Typ. 1 million cycles (A cycle consists of the wire being pulled out and drawn in) (the service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration)
• Resistance to shocks is 50 g, 6 ms (According to EN 60068-2-27)
• IP67 Encoder enclosure rating
• IP50 Mechanic enclosure rating
• Defined by the higher minimum and lower maximum value of the operating temperature of the encoder and the mechanism
• ≤ 0.2 mm (value applies to wire draw mechanism) reproducibility
• ≤ ± 2 mm Linearity (Value Applies to Wire Draw Mechanism)

Standard/Approvals:EU Declaration of Conformity, China RoHS, CE Certified