Sick 1034300

Sick HighLine Wire Draw Encoder; Measurement Range: 0 to 5m; Connection Type: Connector M23, 12-Pin, Male, Radial; Supply Voltage: 10 to 32 V; Power Consumption: 0.8 W; Clock Frequency: 1 MHz; Maximum Output Frequency: 20 g, 10 Hz to 2000 Hz (According to EN 60068-2-6) Frequency Range of Resistance to Vibrations; Pulses Per Revolution: 6680; Permissible Relative Humidity: 90 % (Condensation of the Optical Scanning not Permitted); Maximum Operating Speed: 10 m/s; Measuring Wire Diameter: 1.35 mm; Initialization Time: ≤ 2 ms; Spring Return Force: 15 to 20 N; Actual Wire Draw Length: 5.2m; Wire Acceleration: 70 m/s²; Material: Aluminum (Anodized) Housing, Plastic Wire Draw Mechanism; Operating Temperature: -20 to 70°C (Encoder), -30 to 70°C (Mechanics); Weight: 3.3 kg (Including Encoder), 7.1 g/m (Measuring Wire), 2.8 kg (Mechanics)

• 
  Brochure 1
• 
  Brochure 2
• 
  Catalog
• 
  Installation Instructions 1
• 
  Installation Instructions 2
• 
  Specification Sheet
• 
  Technical Drawing 1

With wire draw lengths from 2 to 50m, the HighLine series of wire draw encoders have enormous range. Thanks to guide rollers, the HighLine series enables flexible measurement paths - even around obstacles. Their rugged housing and dirt-resistant brush assemblies allow the encoder to be used in the toughest of environments, including dust, shock and vibration, which ensure a long service lifetime.

• Modular measuring system with a wide selection of interfaces/measuring lengths
• Very rugged system (dirt scraper, integrated brushes)
• High quality winding mechanism and wire input
• High enclosure rating
• High resistance to shock and vibrations reduces maintenance costs
• Extremely high resolution possible
• Reliable solution for use in harsh ambient conditions
• Long service life due to rugged industrial housing
• Quick and easy installation without the need for precise linear guidance
• Low integration and maintenance costs
• Customization options reduce storage costs
• Analog interface speeds up commissioning and cost-effective interface card can be used
• 150 years (This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532) (The value applies to the mounted encoder)
• Electronic adjustment via SET cable
• Highly flexible stranded steel 1.4401 stainless steel V4A measuring wire
• Compliance to EN 61000-6-2 and EN 61000-6-3 EMC
• Typ. 1 million cycles (A cycle consists of the wire being pulled out and drawn in) (the service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration)
• Resistance to shocks are 10 g, 6 ms (According to EN 60068-2-27)
• IP67 Encoder enclosure rating, IP64 mechanic enclosure rating
• Defined by the higher minimum and lower maximum value of the operating temperature of the encoder and the mechanism
• ≤ 1 mm (value applies to wire draw mechanism) reproducibility
• ≤ ± 2 mm Linearity (value valid taking into account the exact length of the measuring wire per revolution (Indicated on the Label on the Wire Draw Mechanism))

Standard/Approvals:EU Declaration of Conformity, China RoHS, CE Certified