Sick 1030019

Sick ATM60 Multi Turn Absolute Encoder; Mechanical Interface: Blind Hollow Shaft; Connection Type: Bus Adaptor with Cable Screw Fixings or Connector; Shaft Diameter: 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm x 6.4 mm, 9.5 mm, 12.7 mm; Supply Voltage: 10 to 32 VDC; Permissible Relative Humidity: 98 %; Angular Acceleration: ≤ 500000 rad/s²; Operating Torque: 0.8 Ncm (20°C) with Shaft Seal; Error Limits: ± 0.25°; Start Up Torque: 1.2 Ncm (20°C) with Shaft Seal; Moment of Inertia of the Rotor: 55 gcm²; Permissible Shaft Movement, Axial Static/Dynamic: ± 0.5 mm, ± 0.2 mm; Permissible Shaft Movement, Radial Static/Dynamic: ± 0.3 mm, ± 0.1 mm; Number of Steps Per Revolution: 8,192; Number of Revolutions: 8,192; Initialization Time: 1250 ms; Data Transmission Rate: DIP Switches or Protocol, 125 kBaud; 250 kBaud; 500 kBaud; Maximum Resolution (Singleturn): 8,192 (13 bit); Maximum Resolution (Multiturn): 8,192 (13 bit); Rotational Speed: ≤ 3000 min⁻¹; Material: Stainless Steel Shaft, Aluminum Flange, Aluminum Die-Cast Housing; Operating Temperature: -20 to 85°C; Storage Temperature: -40 to 125°C (Without Package); Weight: 0.59 kg

• 
  Brochure 1
• 
  Brochure 2
• 
  Brochure 3
• 
  Catalog
• 
  Installation Instructions 1
• 
  Installation Instructions 2
• 
  Installation Instructions 3
• 
  Specification Sheet
• 
  Technical Drawing 1

• Extremely rugged, tried-and-tested absolute multi-turn encoder with a resolution of up to 26 bits
• Mechanical interface - face mount, servo flange, blind hollow shaft and adapter accessories
• Zero-set and preset functions via hardware or software
• No battery required
• Electrical interface - CAN/DeviceNet specification 2.0B, electrically isolated, device profile - Generic [0]
• Electronically adjustable, configurable resolution
• Network status info via duo LED
• Magnetic scanning, reverse polarity protection
• Fewer variants are required since one freely programmable encoder supports all singleturn and multiturn resolutions
• Variety of electrical connection adapters (1 to 2x PG, 1 to 2x M12)
• Maintenance-free encoder, long service life
• Easily interchangeable collets for the blind hollow shaft makes a base device with flexible application possibilities
• Quick commissioning using the zero-set/preset function either at the press of the button on the device or via software
• Highly reliable shock and vibration resistant is suitable for safer applications
• Worldwide availability and service
• Address setting: 0 to 63, DIP switches or protocol
• Network status LED, 2-colours
• 150 Years (EN ISO 13849-1) mean time to dangerous failure
• Bus termination - DIP switch (Should only be Connected in the Final Device)
• Compliance to EN 61000-6-2 and EN 61000-6-3 EMC
• IP67 Rating, with shaft seal (According to IEC 60529), IP43 rating, without shaft seal, on encoder flange not sealed (According to IEC 60529), IP66 rating, without shaft seal, on encoder flange sealed (According to IEC 60529)
• Bearing lifetime of 3.6 x 10^9 revolutions
• 100 g, 6 ms (According to EN 60068-2-27) Shock resistant
• 20 g, 10 to 2,000 Hz (According to EN 60068-2-6) Vibration resistant
• 0.25 ms position forming time

Standard/Approvals:IEC 60529