Sick 1034773

Sick ARS60 Single Turn Absolute Encoder; Mechanical Interface: Blind Hollow Shaft; Connection Type: Cable, 22-Wire, Radial, 3m; Shaft Diameter: 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm x 6.4 mm, 9.5 mm, 12.7 mm x 18 mm; Shaft Length: 18 mm; Supply Voltage: 10 to 32 VDC; Power Consumption: 90 mA (No Load); Permissible Relative Humidity: 90 % (Condensation of the Optical Scanning not Permitted); Angular Acceleration: ≤ 500000 rad/s²; Operating Torque: 0.4 Ncm; Error Limits: 0.035° (Binary Number of Steps), 0.046° (Non-Binary Number of Steps); Start Up Torque: 0.6 Ncm; Permissible Shaft Movement, Axial Static/Dynamic: ± 0.5 mm, ± 0.2 mm; Permissible Shaft Movement, Radial Static/Dynamic: ± 0.3 mm, ± 0.1 mm; Number of Steps Per Revolution: 42; Number of Revolutions: 1; Initialization Time: 80 ms; Maximum Resolution (Singleturn): 42; Maximum Resolution (Multiturn): 1; Operating Temperature: -20 to 85°C; Storage Temperature: -40 to 100°C

• 
  Brochure 1
• 
  Brochure 2
• 
  Catalog
• 
  Installation Instructions 1
• 
  Specification Sheet
• 
  Technical Drawing 1

CoreTech technology permits tailor-made solutions for every application, due to its modular design. ARS 60 absolute encoders single turn are available with any desired number of steps between 2 and 32,768. Further highlights of this generation of encoders - simple zero adjustment by pressing a button located under a cap on the rear of the encoder or remotely via a signal line.

• Excellent price/performance ratio
• Long LED lifetime as a result of automatic light regulation
• Maximum reliability as a result of opto-ASICs with chip-on-board technology
• Interchangeable collets for hollow shaft diameters from 6 to 15 mm and 1/4, 3/8, 1/2"
• Whether with face mount flange, servo flange, blind or through hollow shaft with connector or cable outlet, SSI or parallel interface - ARS 60 absolute single turn encoders will meet virtually any application profile
• 300 years (EN ISO 13849-1) mean time to dangerous failure
• Complies to EN 61000-6-2 and EN 61000-6-3 (EMC according to the standards quoted is achieved if shielded cables are used)
• IP66 (according to IEC 60529)
• Bearing lifetime of 3.6 x 10^9 revolutions
• Resistance to shocks are 50 g, 11 ms (According to EN 60068-2-27)
• 20 g, 10 to 2,000 Hz (According to EN 60068-2-6) Vibration resistant
• CW (Clockwise), increasing, when turning the shaft for clockwise rotation, looking in direction "A" (See Dimensional Drawing) increasing when viewing the clockwise rotating shaft
• Short-circuit protection, reverse polarity protection

Standard/Approvals:EU Declaration of Conformity, China RoHS, CE Certified, TUVRheinland CUS