Sick 1028232

Sick KT10-2 Contrast Sensor; Housing Design: Rectangular; Response Time: 20 µs; Retention Time: 25 ms (Non-Volatile Memory); Output Type: PNP; Connection Type: Male Connector, M12, 5-Pin; Sensing Distance: 10 mm; Light Spot Size: 0.8 mm x 4 mm; Supply Voltage: 10 to 30 VDC; Output Current: 100 mA (Imax); Ripple: ≤ 5 Vpp; Power Consumption: < 120 mA; Switching Output (Voltage): PNP: High = Approximate Vs - ≤ 2 V/Low 0 V; Switching Frequency: 25 kHz; Dimension: 30.4 mm x 53 mm x 80 mm; Wave Length: 640 nm, 525 nm, 470 nm; Enclosure Rating: IP67; Adjustment: Single Teach-In Button; Light Source: LED, RGB; Light Spot Direction: Vertical; Housing Material: Zinc Die-Cast; Operating Temperature: -10 to 55°C; Storage Temperature: -10 to 75°C; Weight: 400 g

• 
  Brochure 1
• 
  Catalog
• 
  Installation Instructions 1
• 
  Specification Sheet
• 
  Technical Drawing 1

Extremely high speeds, poor contrasts and reflective materials are no problem for the KT10-2. Ease of use is the defining feature of the second generation of the KT10. Even during the teach-in phase, the sensor selects the transmission color that best matches the existing contrast. And, the sensor adjusts itself if marks need to be detected on glossy foils. In addition, the sensor compensates for dirt build-up on lenses using automatic drift correction. The KT10-2 offers an exceptionally fast switching frequency, an easy-to-read bar graph display and 2 light exits. The bar graph display provides visible confirmation of the teach-in and can be used to monitor the sensor's status during operation. The sensor's two interchangeable light exits enable the KT10-2 to be mounted in more places.

• Teach-in button adjustment
• UV Connections, reverse polarity protected, output Q short-circuit protected, interference pulse suppression, outputs overcurrent and short-circuit protected
• Class II protection
• Long and short side of housing, exchangeable
• Static 2-point teach-in, dynamic teach-in (minimum/maximum)
• Automatic drift correction output
• 20 ms Adjustable time delay

Standard/Approvals:CE Certified, cULus Listed, IEC 60068, NRKH.E181493 & NRKH7.E181493